Vehicle security and assistance
Central locking, ignition locks, broken keys, car opening. Block System and Bullock mechanical anti-theft devices in Syracuse, Ragusa and Augusta.
DiscoverWhat we do
From the house key to the car remote. Come to the shop or call: we tell you if we can help.
Key duplication: our core service, every location DISEC Specialized Solution Partner: lock protectors See all servicesWhere we are
You find us in Syracuse, Ragusa, Augusta, Padua and Sesto San Giovanni. Each location lists the services it offers.
See all locations Compare locationsViale Paolo Orsi 41, 96100 Siracusa
0931 185 6595Via Achille Grandi 7, 97100 Ragusa
0932 229906Viale America 1, 96011 Augusta
0931 185 2355Via Chiesanuova 65, 35136 Padova
049 20 23 467Viale F.lli Casiraghi 452, 20099 Sesto San Giovanni
02 4966 8195Lost your key, need a spare or your remote no longer responds? We work on cars, motorbikes, scooters, trucks, vans, motorhomes, boats and work vehicles.
Keyok duplicates and makes keys for cars, motorbikes, trucks, motorhomes and boats: transponder, keyless and smart keys, immobiliser programming and remote repair. With make, model and year of the vehicle we tell you what can be done before we start. We work in five locations, since 2012.
Available in Syracuse, Ragusa, Augusta, Padua and Sesto San Giovanni.
Often yes: we copy the mechanical cut and pair the chip. On some models the car must come in, and we tell you beforehand.
A keyless key is recognised at a distance without being inserted; a traditional key is inserted and turned. The work involved differs, and we check it on your model.
Yes, we check it. If the board works, a repair is enough; otherwise we explain the alternatives.
Next step: Call your nearest location with make, model and year of the vehicle: we will tell you straight away what is needed.
Cracked shell, worn buttons, a remote to repair or a door cylinder that won't turn? Before buying a new key, see how we repair them. Car keys: repair and replacement
01 / 15
Bring us the key that works: we copy the mechanical cut and pair the transponder, so the control unit recognises it when you start the engine.
Bring the key
The working key, plus the make, model and year of the vehicle and the registration document.
We copy the cut
We reproduce the mechanical part of the key on the key-cutting machine.
We pair the chip
The transponder is paired with the vehicle. Some models need the car on site: we tell you beforehand.
We test it together
We check the lock and the ignition before handing over the key.
02 / 15
When the original is lost or you need another one, we make a new key, mechanical or electronic, with or without a remote.
Call us with the details
Make, model and year: we tell you the key type and whether to bring the vehicle.
We choose the key
Mechanical or electronic, with or without a built-in remote, depending on your vehicle.
Cutting and coding
We cut the key and pair it with the vehicle's control unit.
Handover with a test
We test opening and starting the engine together with you.
03 / 15
Lost all your car keys? In many cases the key can be rebuilt electronically: first we tell you what can be done on your model.
Call the shop
Tell us the make, model and year of the vehicle and what happened.
Documents
Bring the registration document and an ID: we only remake keys for people entitled to them.
Rebuilding
We make a new key and pair it with the control unit. The vehicle is often needed on site.
The lost keys
Where the vehicle's system allows it, we explain how to disable the lost keys.
04 / 15
The immobiliser blocks the ignition if it doesn't recognise the key's chip. We programme the control unit so it recognises the right keys.
Diagnosis
We find out whether the problem is the key, the chip or the control unit's memory.
Vehicle details
With make, model and year we tell you whether programming is possible on your vehicle.
Programming
We store the keys in the control unit, with the vehicle on site.
Ignition test
We check that every key starts the engine.
05 / 15
Keyless keys open and start the car without turning a key. We duplicate or remake them when the model allows it.
Model check
With the vehicle details we check which kind of smart key it uses.
Compatible key
We tell you which key can be used for your vehicle.
Pairing
We pair the key with the vehicle, which usually needs to be on site.
Test
We check keyless entry and starting the engine.
06 / 15
Key warning on the dashboard, or the engine won't start? Before remaking the key, we look for the real cause.
Battery
First we check the key battery: sometimes that is all it takes.
Chip reading
We check that the transponder responds.
Cause found
Key, chip, remote or control unit: we tell you where the problem is.
You decide
We propose a solution before starting any work.
07 / 15
If the chip inside the key is damaged or missing, we replace it and pair it with the vehicle, without changing the whole key when possible.
We open the key
We check the chip housing.
Check
We read the chip and see whether it needs replacing.
New transponder
We fit a compatible chip and pair it with the vehicle.
Test
We check the ignition before handing it back.
08 / 15
Buttons that don't respond, corroded contacts, a board that works on and off: many keys can be repaired instead of replaced.
Diagnosis
We open the key and check the casing, contacts, board and battery.
We explain
We tell you what we found and what the options are.
Repair
We work on the buttons, contacts and circuit.
If it can't be saved
If the board can't be repaired we tell you first: you decide whether to remake the key.
09 / 15
Cracked or worn casing? We move the electronics into a new casing, if the right one exists for your model.
Model check
We check that a suitable casing exists for your key.
Transfer
We move the board and chip into the new casing.
Blade
We reuse the blade or cut a new one, depending on the case.
Test
We check the buttons, opening and ignition.
10 / 15
Does the remote only work up close, or on and off? It is often the battery: we change it at the counter and check that it works.
Bring the key
Just come in with the key or the remote.
The right battery
We pick the battery that fits your remote.
Replacement
We change it and close the casing carefully.
Test
If it still doesn't respond with a new battery, we offer a diagnosis.
11 / 15
The shell is fine, but the remote doesn't work, or works intermittently.
Diagnosis
Diagnosis of the key before any work
Contacts and solder joints
Cleaning and restoring corroded contacts Re-soldering the board
Buttons
Replacing buttons and microswitches
Battery and chip
Replacing the battery and repairing the battery holder Checking the chip/transponder; replacing it when needed
12 / 15
The electronics work, but the case is broken, worn, or the rubber buttons are worn out.
New shell
Fitting a new shell suited to your model
Board in the new shell
Transferring the electronic board into the new shell
Blade
Transferring the mechanical blade when present
Buttons
Replacing worn buttons
Battery
New battery, if needed, during the same job
13 / 15
Keys for the vehicle and for the living-area locks: bring us the keys or the vehicle details and we check what can be copied or remade.
Key or details
Bring the key you have, or the make, model and year of the vehicle.
Key type
We work out whether it is mechanical or electronic and what is needed.
Copy or new key
We make the copy or, where possible, a new key.
Test
We suggest trying it straight away on the vehicle's locks.
14 / 15
Tractors, excavators and work vehicles: we check the key type and, if possible, duplicate or remake it.
Key or details
Bring the key or the machine's details: make, model and year.
Check
We check the key type and whether there is a chip to pair.
Copy
We make the duplicate or a new key, when possible.
Pairing
If the key is electronic, we tell you beforehand whether the machine is needed.
15 / 15
Ignition keys for boats and jet skis: bring us the key or the craft's details and we check what can be done.
Key or details
Bring the key you have, or the make and model of the craft.
Check
We work out the key type and whether it is coded.
Copy
We make the copy when the key type allows it.
Test
We suggest trying it on the craft before heading out.
Where
You'll find it in Syracuse, Ragusa, Augusta, Padua and Sesto San Giovanni.
Call the nearest shop with the make, model and year of the vehicle.
Questions
Make, model and year of the vehicle, plus the registration document. With these we can tell the key type and whether to bring the vehicle.
In many cases, yes: the key can be rebuilt electronically. We tell you first what can be done on your model.
If the board works, a repair is usually enough. After the diagnosis we explain both options and you choose.
It depends on the vehicle and the key type. Call the shop with the vehicle details and we'll give you an assessment.
Related
Central locking, ignition locks, broken keys, car opening. Block System and Bullock mechanical anti-theft devices in Syracuse, Ragusa and Augusta.
DiscoverDuplication and programming of remotes for gates, garages, sectional and up-and-over doors, motorised shutters and awnings.
DiscoverEmergency call-outs during shop hours, home visits, surveys, company fleets, condominiums, dealerships and garages.
Discover